Line laser ADA CUBE 360 PROFESSIONAL EDITION

Article А00445
Line laser ADA CUBE 360 PROFESSIONAL EDITION

Line laser ADA CUBE 360 PROFESSIONAL EDITION

Article А00445

Specifications

Laser projection 1H (360°) 1V
Working range 20 m / 70 m (with receiver) 
Accuracy ± 0,3 mm/m
Laser diode class 2, 635 nm, < 1 mWt
Dust/water protection IP 54
Power supply 3 batteries АА / 1.5 V
Tripod thread 1/4"
Dimensions 95х95х65 mm
Weight 0,39 kg
Manual

Description

Line laser ADA CUBE 360 is a Line laser equipment that will be appreciated by professional and private users due to its functions. Thanks to the special emitter the instrument projects 360 degrees horizontal beam. It is ideal instrument during construction and repair works when paving tile laying or other coating, wallpapering and so on.

Convenient marking. Line laser projects vertical line and 360° horizontal line. There is no need to rotate the instrument when making horizontal marking. Just place ADA Cube 360 on the selected height. Horizontal beam will be along the perimeter. There is a 90° projection (laser cross) when switching on the vertical line. It is possible to switch off laser lines one-by-one. Just select the line that you need for a work.

Accurate levelling. Auto self-leveling. ADA CUBE 360 differs in high accuracy – the error is just 0,3 mm/m.

Receiver mode. There is a receiver mode for outdoor operation under bright light. The range of the marking increases from 20 to 70m.

Two places of attachment. It is possible to place ADA CUBE 360 on the tripod or attach to the wall mount due to the thread 1/4". One thread is located on the back part of the instrument, another is on the bottom.

TILT operation. It is possible to incline instrument at any angle working in this mode. Just lock the pendulum setting the switch on button in the middle position. Laser beams will be projected with required inclination. This function is used, for example, when setting stair railings.

Protected housing. The whole housing of ADA CUBE 360 is protected from all sides. Rubber parts protect the instrument against damages during falls and hits.

Elevating tripod. Light aluminum support with sliding column for installation at the height from 35 up to 110 cm. The elevating detail is used for smooth adjustment of the height in the range of 25 cm. The tripod provides for quick installation of the level at the required height in any place.

 

Includes

Line laser
Case bag
Elevating tripod
Batteries
Instruction

Includes

Line laser
Case bag
Elevating tripod
Batteries
Instruction